JD60-7-DB Outdoor Kit

JD60-7-DB Outdoor Kit//OVERVIEW

Price: $3,339.75 SKU: JD60-7-DB-OK

This kit was specifically designed for customers who are located in weak reception areas and need outdoor coverage. With the use of a pre-amp that is placed in-line between the donor antenna and the base repeater, the signals are amplified and filtered to provide you the level of reception you once thought was not possible. All the components are mounted inside a temperature controlled weather proof box.

Please note this is a made to order solution. Therefore we will need 2-3 Days lead time to complete your order. A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.

Industry Leading Dual Band Repeater
85dB+ Gain (W/Pre-amp) / 20dBm Output Power
Unlimited Call Capacity
FCC Approved. ID: SQX-JD60-DB-819
18 Months Warranty
30 Day Money Back Guarantee
MUTE - Auto Shut Down if oscillation is detected
MGC: Manual Gain Control (Uplink & Downlink)
Transparent to Transmitting Tower in Area

Coverage Area - (25,000 - 35,000 sq ft)
Supports 90-240 Volts
Alarm LED's for Error Detection
Supports Any Cellular Device (Voice & Data)
Fully expandable to cover much larger areas
Automatic Gain Control Feature
Carrier Grade Performance & Quality
Free! - Phone Tech Support

30 Day Money Back Guarantee 18 Months Warranty

ADDITIONAL PRODUCT//INFORMATION

The JD60-7-DB Outdoor Cellular Repeater Kit is supplied with all of the components needed to provide coverage for rural outdoor areas where reception is weak. At its heart is our feature-filled JD60-7-DB Full Duplex Repeater together with other components to a complete system that performs exceptionally well.

The Kit Includes:

Omni / Yagi Donor Antenna (Depending on Terrain)
75ft Low-Loss Coax with Connectors (JDC400)
Weather Proof Box with all Components Installed
JD60-4-DB Repeater & Power Supply
WCB Series Pre-amp
Lightning Surge Protector
Various Cables and Connectors
Flat Panel Service Antenna
50ft Low-Loss Coax with Connectors (JDC400 x 2)
Coax Seal (3)
Mounting Hardware
User Manual
Warranty Card

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 1db steps up to 31dB, using color changing LED's as a status indicator.

These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE Feature has also been added to this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30sec MUTE cycle, the system will again shut down after 2 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence.

Frequency Chart

Frequency Range	Uplink	Downlink
JD60-7-819	824~849 MHz	869~894 MHz
JD60-7-819	1850~1910 MHz	1930~1990 MHz
JD60-7-918	890~915 MHz	935~960 MHz
JD60-7-918	1710~1785 MHz	1805~1880 MHz
JD60-7-921	890~915 MHz	935~960 MHz
JD60-7-921	1920~1980 MHz	2110~2170 MHz
Filter Bandwidth	GSM & CDMA 25MHz \| PCS 60MHz AWS 45MHz \| LTE 11Mhz
Max total output power	≥15dBm	≥20dBm
Max. Gain	≥65dB	≥70dB
Gain Flatness	CDMA & GSM: ≤5dB, PCS & DCS: ≤8dB AWS ≤6dB, LTE ≤3dB
AGC Range	?15dB - Auto shut off after 15dB (MUTE)
Maximum Input Power	0dBm
Gain Control Range(MGC)	≥31dB in step of 1dB by Dip Switch
V.S.W.R	≤2
Intermodulation	9KHz~1GHz≤-36dBm	9KHz~1GHz≤-20dBm
Intermodulation	1GHz~12.75GHz≤-30dBm	1GHz~12.75GHz≤-20dBm
Spurious Emission	9KHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm
Spurious Emission Mask	Complies with 3GPP TS 25.106
Modulation Accuracy	Complies with 3GPP TS 25.106
Peak Code Domain Error	Complies with 3GPP TS 25.106
Frequency Stability	≤0.01ppm
ACPR	≥30dB @±5MHz&±10MHz
Noise Figure (@ max gain)	≤6dB
Group Delay	≤4.5 micro Sec
Impedance	50Ω

Mechanical Chart

Power Supply	Input 90- 264 VAC,50 Hz, transformer: 12V/5A
Cooling	Heatsink Convection Cooling
Power Comsumption	< 35W
Operating Temperature	-10~+50? (14F ~ 122F)
RF Connector	N ( female )-Type
Weather Proof	IP40
Dimension	250 x 145 x 53mm (9.84" x 5.70" x 2")
Weight	≤3.2Kg (7.1Lbs)
LED Alarm	Standard
Power LED	Power Indicator
ALC LED	Amber @ ALC 1~5dB, Red @ ALC 15-20dB
ALC LED	LED off after 5 seconds red color

Shopping cart

JD60-7-DB Outdoor Kit
For Locations upto 35,000 sq ft.