JD60-9-LC Series
85dB Gain (175,00 - 225,000 sq ft)

The JD60-9-LC unit is also fully customizable, making design and installation of an indoor system extremely easy. With the use of RF Signal splitters and indoor antennas, we can design a solution that fits your specific needs. A typical unit can easily cover more that 225,000 sq ft, however multiple units can also be incorporated to cover a very large area (≥800,000+ sq ft) while maintaining an acceptable noise floor.

By making use of the latest Gain Adjustable Technology available today, this repeater allows the user to manually increase or decrease the Uplink & Downlink gain levels individually in 1db steps, up to 31dB, by use of bottons on the LCD panel . By making use of SAW filters, this unit ensures a clean stable signal at all power levels.

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in color changing LED's as a status indicator. These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE feature comes standard with this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2-4 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30 sec MUTE cycle, the system will again shut down after 5 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence