Shopping cart

There are no products in your shopping cart.

View Cart Checkout

0 Items Total: $0.00

JD60-8 Series//OVERVIEW

Price: $2,450.00 SKU: JD60-8

The JD60-8 Indoor Cellular Repeater is a high-powered, gain adjustable repeater that is perfect for providing wireless coverage to a large office building, department store, warehouse, underground parking lot, or multi-story building.

A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.

  • Unlimited Call Capacity
  • 80dB Gain / 27dBm Output Power
  • FCC Approved. ID: SQX-JD60-8-850 / JD60-8-19
  • 18 Months Warranty
  • 30 Day Money Back Guarantee
  • MUTE - Auto Shut Down if oscillation is detected
  • MGC: Manual Gain Control (Uplink & Downlink)
  • Transparent to Transmitting Tower in Area
  • Coverage Area - (85,000 - 125,000+ sq ft)
  • Supports 90-240 Volts
  • Alarm LED's for Error Detection
  • Supports Any Cellular Device (Voice & Data)
  • Fully expandable to cover much larger areas
  • Supports entire bandwidth
  • Automatic Gain Control Feature
  • Automatic Limit Control Feature (ALC)
  • Carrier Grade Performance & Quality
  • Free! - Phone Tech Support
30 Day Money Back Guarantee 18 Months Warranty

Please select a megahertz range for this product

Sub-Total: $2,450.00

ADDITIONAL PRODUCT//INFORMATION

Features Technical Specifications

The JD60-8 unit is also fully customizable, making design and installation of an indoor system extremely easy. With the use of RF signal splitters and indoor antennas, we can design a solution that fits your specific needs. A typical unit can easily cover more that 125,000 sq ft, however multiple units can also be incorporated to cover a very large area (300,000+ sq ft) while maintaining an acceptable noise floor.

By making use of the latest Gain Adjustable Technology available today, this repeater allows the user to manually increase or decrease the Uplink & Downlink gain levels individually in 1db steps, up to 31dB, by use of dipswitches. By making use of SAW filters, this unit ensures a clean stable signal at all power levels.

The JD60-8 Indoor Repeater is designed to be transparent to the network and will therefore support the same number of calls the BTS in the area can support. The JD60-8 Repeater is compact enough that it can be placed within an electrical closet where space is limited.

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in color changing LED's as a status indicator. These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE feature comes standard with this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2-4 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30 sec MUTE cycle, the system will again shut down after 5 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence

Frequency Chart

Model Uplink Downlink
JD60-8-700C LTE 776~787 MHz 746~757 MHz
JD60-8-850 CELL 824~849 MHz 869~894 MHz
JD60-8-900 GSM900 890~915 MHz 935~960 MHz
JD60-8-18 DCS 1710~1785 MHz 1805~1880 MHz
JD60-8-19 PCS 1850~1910 MHz 1930~1990 MHz
JD60-8-21 WCDMA 1920~1980 MHz 2110~2170 MHz
JD60-8-1721  AWS  1710~1755 MHz  2110~2155 MHz
 Filter Bandwidth GSM & CDMA 25MHz | PCS 60MHz AWS 45MHz | LTE 11Mhz
 Max total output power   ≥20dBm ≥27dBm
 Max. Gain ≥75dB ≥80dB
 Gain Flatness   CDMA & GSM: ≤8dB, PCS & DCS: ≤10dB AWS ≤6dB, LTE ≤3dB
 AGC Range ≧15dB - Auto shut off after 15dB (MUTE)
 Maximum Input Power   0dBm
 Gain Control Range(MGC) ≥31dB in step of 1dB by Dip Switch
 V.S.W.R ≤2
Spurious Emission 9KHz~1GHz≤-36dBm
1GHz~12.75GHz≤-30dBm
Spurious Emission Mask Complies with 3GPP TS 25.106
Modulation Accuracy Complies with 3GPP TS 25.106
Peak Code Domain Error Complies with 3GPP TS 25.106
Frequency Stability ≤0.01ppm
 ACPR ≥30dB ＠±5MHz＆±10MHz
Noise Figure (@ max gain)   ≤6dB
Group Delay ≤4.5 micro Sec
 Impedance   50Ω

Mechanical Chart

Power Supply Input 90- 264 VAC,50 Hz, transformer: 12V/5A
Cooling Heat Sink Convection cooling
Power Consumption < 35W
Operating Temperature -10°C~+50°C (14F ~ 122F)
 RF Connector N Female
Weather Proof IP40
 Dimension 250 x 220 x 53mm
Weight ≤3.2Kg (7.1Lbs)
Input Signal Levels -50dBm or more
LED Alarm Standard
Power LED Power Indicator
ALC LED Amber @ ALC 1~5dB, Red @ ALC 15-20dB
LED off after 5 seconds red color

 

RELATED//PRODUCTS

JD60-8-DB Series

80dB Gain Dual Band
(65,000 - 80,000 sq ft)

JD60-6 Series

60dB Gain Single Band (30,000 - 35,000 sq ft)

JD60-7 Series

70dB Gain Single Band (40,000 - 50,000 sq ft)

JD60-7-TB

70dB Gain Triple Band (45,000 - 55,000 sq ft)

// See All Consumer Repeaters