JD60-4 Series
68dB Gain (7,000 - 9,000 sq ft)

The new model JD60-4 Indoor Cellular Repeater is a full duplex power amplifier supplied with a power supply and mounting bracket.

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 1db steps up to 31dB, using color changing LED's as a status indicator. These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE feature comes standard with this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2-4 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30 sec MUTE cycle, the system will again shut down after 5 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence

The JD60-4 Full Duplex Cellular Repeater is designed to improve the voice or data transmission quality of an area by receiving, amplifying and re-transmitting signals of the base station into a specified area. Some service providers have reported their customers getting as much as 7000sq - 9000sq ft of coverage, this however will depend on the strength of the signal being received by the outdoor antenna, the amount of internal walls, and the type of material the internal walls are made of.

Product Benefits:

The benefits of the JD60-4 Indoor Repeater are numerous. It provides a wireless improvement in reception to areas that were once affected by poor cellular reception. All devices operating within the frequency range of the repeater will see an improvement in performance. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

With a wireless in-building repeater, you no longer have the inconvenience or time wasted by having to leave the building to receive or make a cellular call. The JD60-4 Indoor Cellular Repeater ensures that your line of communication will always be there. No more missed business calls or loss of sales.

• Improved wireless coverage in your home or office. No wires connected to your phone!
• Unlimited number of simultaneous calls supported
• Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)
• No more running outside or near windows to complete your calls or receive pages.
• Quick and easy installation. All necessary hardware included in one complete kit.
• Free Technical support.

Installation: The JD60-4 Repeater is the preferred choice of service providers due to its superior quality and low-noise values. No special tools, test equipment or technical knowledge of your network is required to complete this install. The repeater is fully adjustable and will fine-tune itself as conditions change. The active software is very stable and will thus provide years of trouble free service. Although the JD60-4 does not come in a dual band model, units can be paired together to achieve a dual band system. Simply provide us details on what you would like to achive and our team will design a layout for you.