Price: $295.00 SKU: JD55-PR
The JD55-PR Series Indoor Cellular Repeater is a technically advanced, gain adjustable repeater that is perfect for providing wireless coverage to a home or small office.
A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.
|
|
The new model JD55-PR Indoor Cellular Repeater is a full duplex power amplifier supplied with a power supply and mounting bracket.
To maintain safe and specific output signal levels, this advanced repeater has built-in Automatic Gain Control (AGC) and Automatic Limit Control (ALC) circuits, which can automatically control the gain of the repeater within a 15dB range. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the uplink or downlink channels individually with the use of a color changing LED indicator. These Alarm LED's are used as a guide to prevent your installation from reproducing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.
A Network Safe / MUTE feature comes standard with this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2-4 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30 sec MUTE cycle, the system will again shut down after 5 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence
The JD55-PR Repeater is also proving to be a cost-effective alternative for persons who are dropping their monthly expense of a land line but still need to ensure that high quality phone service is available at all times, either for business or personal communication. In less than a year, this investment pays for itself. It's available in almost any frequency band or combination of bands to suit most networks (Voice & Data) across the globe. No matter where in the world you are located or on which network, there is a JD55-PR Repeater made for you.
Locations that suffer from very weak outdoor reception are no trouble for the new model JD55-PR Repeater. You can now mate our popular WCB Series Dual Band Line Amplifier to this repeater to act as a pre-amp, which will boost a very weak downlink signal, effectively filter noise, and provide you with wireless coverage you can be happy with. Due to the modular design, upgrading to a pre-amp can always be done at a later date.
With the JD55-PR Full Duplex Repeater, you can be assured of a high-quality product that will provide years of trouble-free service where other brands fail miserably. Order yours today!
| Frequency Range | Uplink | Downlink | |
|---|---|---|---|
| JD55-PR850 | CELL | 824~849 MHz | 869~894 MHz |
| JD55-PR900 | GSM900 | 890~915 MHz | 935~960 MHz |
| JD55-PR18 | DCS | 1710~1785 MHz | 1805~1880 MHz |
| JD55-PR19 | PCS | 1850~1910 MHz | 1930~1990 MHz |
| JD55-PR21 | WCDMA | 1920~1980 MHz | 2110~2170 MHz |
| JD55-PR819 | CELL/PCS | 824~849 MHz | 869~894 MHz |
| 1850~1910 MHz | 1930~1990 MHz | ||
| JD55-PR918 | GSM900/DCS | 890~915 MHz | 935~960 MHz |
| 1710~1785 MHz | 1805~1880 MHz | ||
| JD55-PR921 | GSM900/WCDMA | 890~915 MHz | 935~960 MHz |
| 1920~1980 MHz | 2110~2170 MHz | ||
| JD55-PR1721 | AWS | 1710~1755 MHz | 2110~2155 MHz |
| JD55-PR8AWS | CELL/AWS | 824~849 MHz | 869~894 MHz |
| 1710~1755 MHz | 2110~2155 MHz | ||
| JD55-PR8750C | CELL/LTE | 824~849 MHz | 869~894 MHz |
| 776~787 MHz | 746~757 MHz | ||
| JD55-PR19-AWS | PCS/AWS | 1850~1910 MHz | 1930~1990 MHz |
| 1710~1755 MHz | 2110~2155 MHz | ||
| Filter Bandwidth | GSM & CDMA 25MHz | PCS 60MHz AWS 45MHz | LTE 11Mhz | ||
| Max total output power | ≥10dBm | ≥10dBm | |
| Max. Gain | ≥60dB | ≥60dB | |
| Gain Flatness | CDMA & GSM: ≤5dB, PCS & DCS: ≤8dB AWS ≤6dB, LTE ≤3dB | ||
| AGC Range | ≧15dB - Auto shut off after 15dB (MUTE) | ||
| Maximum Input Power | 0dBm | ||
| Gain Control Range(MGC) | ≥15dB in step of 5dB by Dip Switch | ||
| V.S.W.R | ≤2 | ||
| Intermodulation | 9KHz~1GHz≤-36dBm | 9KHz~1GHz≤-20dBm | |
| 1GHz~12.75GHz≤-30dBm | 1GHz~12.75GHz≤-20dBm | ||
| Spurious Emission | 9KHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm |
||
| Spurious Emission Mask | Complies with 3GPP TS 25.106 | ||
| Modulation Accuracy | Complies with 3GPP TS 25.106 | ||
| Peak Code Domain Error | Complies with 3GPP TS 25.106 | ||
| Frequency Stability | ≤0.01ppm | ||
| ACPR | ≥30dB ＠±5MHz＆±10MHz | ||
| Noise Figure (@ max gain) | ≤5dB | ||
| Group Delay | ≤4.5 micro Sec | ||
| Impedance | 50Ω | ||
| Power Supply | Input 90- 264 VAC,50 Hz, transformer: 9V/3A |
| Cooling | Heat Sink Convection Cooling |
| Power Consumption | < 35W |
| Operating Temperature | -10~+50℃ (14F ~ 122F) |
| RF Connector | SMA Female |
| Weather Proof | IP40 |
| Dimension | 183 x 128 x 46.3 (mm) |
| Weight | < 1 kg / 2.2Lbs |
| LED Alarm | Standard |
| Power LED | Power Indicator |
| ALC LED | Amber @ ALC 1~5dB, Red @ ALC 15-20dB |
| LED off after 5 seconds red color |
JD60-8-DB Series80dB Gain Dual Band |
JD60-6-TB60dB Gain Triple Band (12,000 - 18,000 sq ft) |
JD60-4 Series68dB Gain Single Band (7,000 - 9,000 sq ft) |
JD60-7 Series70dB Gain Single Band (40,000 - 50,000 sq ft) |
products approved by:
member of:
We’re open Monday - Friday 9:00am - 5:00pm EST. Call us today! 1-866-4-JDTECK -or- 1-877-4-JDTECK | All Content Copyright © 1999~2012 JDTECK | Orlando Website Design by Designzillas
