Price: $500.00 SKU: JD55-PRDCK-G
The JD55-PR Indoor Cellular Repeater Dual Ceiling Kit is a high gain, adjustable repeater system that is perfect for providing wireless coverage to a medium sized home or office.
A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.
|
|
The JD55-PR Dual Ceiling Cell Phone Repeater Kit is supplied with 2 Ceiling Mounted Dome Antennas and includes all the peripheral items needed to complete the installation. This kit is designed to provide cellular coverage (voice & data) for a building up to 3500sq ft. and is perfect for providing wireless coverage inside a medium sized home, office building, restaurant, warehouse, underground parking lot, VIP room, etc.
At the heart of kit is a full duplex 60dB Gain Dual Band repeater that includes carrier grade features like Automatic Gain Control (AGC), Manual Gain Control and MUTE Auto Shut Down to name a few. The standard kit is supplied with a 35ft length of coax that runs from the outdoor antenna to the repeater and 35ft of coax from the repeater to each service antenna. You have the option to customize these coax length as needed. (Minimal additional cost).
Standard Kit Includes:
Yagi Donor Antenna with U Bolts
35ft Length of Coax - Donor
JD55-PR Repeater & Power Supply
SMA Male / SMA Male RF Adapter
2-Way Signal Splitter
35ft Length of Coax - (2)
Ceiling Mount Dome Antennas - (2)
Coax Seal
User Manual
Warranty Card
Free Technical Phone Support
To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 5db steps up to 15dB, using color changing LED's as a status indicator.
These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.
A Network Safe / MUTE Feature has also been added to this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30sec MUTE cycle, the system will again shut down after 2 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence. The JD55-PR Indoor Repeater is designed to be transparent to the network and will therefore support the same number of calls the BTS in the area can support. It is also compact enough that it can be placed within an electrical closet where space is limited.
| Model | Uplink | Downlink | |
|---|---|---|---|
| JD55-PR850 | CELL | 824~849 MHz | 869~894 MHz |
| JD55-PR900 | GSM900 | 890~915 MHz | 935~960 MHz |
| JD55-PR18 | DCS | 1710~1785 MHz | 1805~1880 MHz |
| JD55-PR19 | PCS | 1850~1910 MHz | 1930~1990 MHz |
| JD55-PR21 | WCDMA | 1920~1980 MHz | 2110~2170 MHz |
| JD55-PR819 | CELL/PCS | 824~849 MHz | 869~894 MHz |
| 1850~1910 MHz | 1930~1990 MHz | ||
| JD55-PR918 | GSM900/DCS | 890~915 MHz | 935~960 MHz |
| 1710~1785 MHz | 1805~1880 MHz | ||
| JD55-PR921 | GSM900/WCDMA | 890~915 MHz | 935~960 MHz |
| 1920~1980 MHz | 2110~2170 MHz | ||
| JD55-PR1721 | AWS | 1710~1755 MHz | 2110~2155 MHz |
| JD55-PR8AWS | CELL/AWS | 824~849 MHz | 869~894 MHz |
| 1710~1755 MHz | 2110~2155 MHz | ||
| JD55-PR8750C | CELL/LTE | 824~849 MHz | 869~894 MHz |
| 776~787 MHz | 746~757 MHz | ||
| JD55-PR19-AWS | PCS/AWS | 1850~1910 MHz | 1930~1990 MHz |
| 1710~1755 MHz | 2110~2155 MHz | ||
| Filter Bandwidth | GSM & CDMA 25MHz | PCS 60MHz AWS 45MHz | LTE 11Mhz | ||
| Max total output power | ≥10dBm | ≥10dBm | |
| Max. Gain | ≥60dB | ≥60dB | |
| Gain Flatness | CDMA & GSM: ≤5dB, PCS & DCS: ≤8dB AWS ≤6dB, LTE ≤3dB | ||
| AGC Range | ≥15dB - Auto shut off after 15dB (MUTE) | ||
| Maximum Input Power | 0dBm | ||
| Gain Control Range(MGC) | ≥15dB in step of 5dB by Dip Switch | ||
| V.S.W.R | ≤2 | ||
| Intermodulation | 9KHz~1GHz≤-36dBm | 9KHz~1GHz≤-20dBm | |
| 1GHz~12.75GHz≤-30dBm | 1GHz~12.75GHz≤-20dBm | ||
| Spurious Emission | 9KHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm |
||
| Spurious Emission Mask | Complies with 3GPP TS 25.106 | ||
| Modulation Accuracy | Complies with 3GPP TS 25.106 | ||
| Peak Code Domain Error | Complies with 3GPP TS 25.106 | ||
| Frequency Stability | ≤0.01ppm | ||
| ACPR | ≥30dB @±5MHz&±10MHz | ||
| Noise Figure (@ max gain) | ≤5dB | ||
| Group Delay | ≤4.5 micro Sec | ||
| Impedance | 50Ω | ||
| Power Supply | Input 90- 264 VAC,50 Hz, transformer: 9V/3A |
| Cooling | Heatsink Convection Cooling |
| Power Consumption | < 35W |
| Operating Temperature | -10°~+50°C (14F ~ 122F) |
| RF Connector | SMA Female |
| Weather Proof | IP40 |
| Dimension | 183 x 128 x 46.3 (mm) |
| Weight | < 1 kg / 2.2Lbs |
| LED Alarm | Standard |
| Power LED | Power Indicator |
| ALC LED | Amber @ ALC 1~5dB, Red @ ALC 15-20dB |
| LED off after 5 seconds red color |
JD55-PR - Standard Kit ~ WhiteWireless coverage for locations 2000 - 3000 sq ft. + (Dual or Single Band) |
JD65-XT Rural Kit ~ Dual WallWireless coverage for locations 5000 to 6000sq ft. (Dual or Single Band) ~ Remote Locations |
JD55-PR - Dual Wall Kit ~ WhiteWireless coverage for locations 3000 sq ft. + (Dual or Single Band) |
JD55-PR - Dual Ceiling Kit ~ WhiteWireless coverage for locations 3000 sq ft. + (Dual or Single Band) |
products approved by:
member of:
We’re open Monday - Friday 9:00am - 5:00pm EST. Call us today! 1-866-4-JDTECK -or- 1-877-4-JDTECK | All Content Copyright © 1999~2012 JDTECK | Orlando Website Design by Designzillas
