Home

JD60-7-DB

Industry Leading Dual Band Repeater
70dB Gain / 20dBm Output Power
Unlimited Call Capacity
FCC Approved. ID: SQX-JD60-DB-819
18 Months Warranty
30 Day Money Back Guarantee
MUTE - Auto Shut Down if oscillation is detected
MGC: Manual Gain Control (Uplink & Downlink)
Transparent to Transmitting Tower in Area
Coverage Area - (35,000 - 50,000 sq ft)
Supports 90-240 Volts
Alarm LED's for Error Detection
Supports Any Cellular Device (Voice & Data)
Fully expandable to cover much larger areas
Automatic Gain Control Feature
Carrier Grade Performance & Quality
Free! - Phone Tech Support
Testimonials! - Click Here

Mhz	Add to Cart	Option
800 / 1900	$1495.00	A
900 / 1800	$1495.00	B
900 / 2100	$1550.00	C

A - D/B USA (GSM,CDMA,GPRS,EDGE,PCS,3G)
B - Dual Band - Global (GSM / DCS)
C - Dual Band Global (GSM,3G,UMTS,WCDMA)

(Click here for User Manual)

Add to Wishlist

Features

The JD60-7-DB Dual Band Cellular Repeater is a high-powered, gain adjustable, dual band repeater that is perfect for providing wireless coverage inside a large home, office building, restaurant, warehouse, underground parking lot, VIP room, etc. This unit conveniently supports two frequency bands in one base unit, making deployment for any two popular pair of bands very quick and simple.

(Click for Animation)

The JD60-7-DB unit is also fully customizable, making design and installation of an indoor system extremely easy. With the use of RF Signal splitters and indoor antennas, we can design a solution that fits your specific needs. Multiple units can also be incorporated to cover a large area. (35,000 – 50,000 sq ft+)

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 1db steps up to 31dB, using color changing LED's as a status indicator. These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE Feature has also been added to this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30sec MUTE cycle, the system will again shut down after 5 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence..

The JD60-7-DB Indoor Repeater is designed to be transparent to the network and will therefore support the same number of calls the BTS in the area can support. It is also compact enough that it can be placed within an electrical closet where space is limited.

Specifications

Frequency Range	Uplink	Downlink
JD60-7-819	824~849MHz	869~894MHz
JD60-7-819	1850~1910MHz	1930~1990MHz
JD60-7-918	890~915MHz	935~960MHz
JD60-7-918	1710~1785MHz	1805~1880MHz
JD60-7-921	890~915MHz	935~960MHz
JD60-7-921	1920~1980MHz	2110~2170MHz
Bandwidth GSM	25MHz
Bandwidth DCS	75MHz
Bandwidth PCS	60Mhz
Bandwidth WCDMA	60MHz
Max Gain	≥65 dB	≥70 dB
Gain Flatness	CDMA & GSM	<=5dB
	PCS & DCS	<=8dB
	WCDMA	<=5dB
AGC Range	≥20dB
Gain Control Range(MGC)	≥31dB in 1 dB step
Input Power	0dBm
Input Power	0dBm
Output Power	UpLink: ≥15dBm	DownLink: ≥20dBm
Intermodulation	Uplink	Downlink
	9KHz~1GHz≤-36dBm	9KHz~1GHz≤-20dBm
	1GHz~12.75GHz≤-30dBm	1GHz~12.75GHz≤-20dBm
Spurious Emission	9KHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm
Spurious Emission Mask	Complies with 3GPP TS 25.106
Modulation Accuracy	Complies with 3GPP TS 25.106
Peak Code Domain Error	Complies with 3GPP TS 25.106
ACRR	≥30dB ＠±5MHz＆±10MHz
Frequency Stability	≤0.01ppm
Noise Figure	≤5dB (Typical)	≤5dB (Typical)
Group Delay	≤0.5 micro Sec	≤0.5 micro Sec
V.S.W.R	≤2	≤2
Impedance	50Ω	50Ω

Mechanical

Power Supply	Input 90- 265 VAC,50 Hz, transformer: 12V/5A
Cooling	Heatsink Convection cooling
Operating Temperature	-10~+50℃ (14F ~ 122F)
RF Connector	N ( female )-Type
Weather Proof	IP 40
Dimension	250 x 145 x 53mm (9.84" x 5.70" x 2")
Weight	≤2Kg (4.4Lbs)
LED indication	Power LED	DC ON/OFF
	Alarm LED	ALC 1~5dB,orange
		ALC 20~25dB,red

Download PDF Brochure

Click here to Download

JDTECK - Phone Booster & Building Repeaters

JDTECK - Wireless Building Cellular & Cell Phone Adapters